某铅锌矿的三维地质模型及储量估算

针对矿山现有的地质信息数据等，建立了以利用Surpac软件的三维地表模型、矿体模型及地质数据库，对矿山资源储量进行计算。基于地质统计学的理论，建立某铅锌矿地表模型、钻孔数据库、矿体模型、块体模型，对矿体内样品进行组合分析统计，采用幂次距离反比法对块体品位进行估值，最后根据国内对地质矿产资源的分类方法，按照不同边界品位、工业品位等分类依据，得出资源储量核实报告，为铅锌矿的后续生产，提供了可靠保证。结果表明：通过构建该矿地质数据库，建立的三维模型，可对地质工程、采矿工程、储量估算、矿石品位动态管理等提供技术支持。     

新疆钢铁产业集中度浅析

钢铁产业集中度是反应行业发展水平的重要指标。文章重点介绍了2016年以来新疆钢铁产能布局和钢铁企业生产情况,分析了新疆钢铁产能利用率和产业集中度,就今后新疆钢铁产业集中度指标提出了建议。     

An approach to measure infill matric suction of irregular infilled rock joints under constant normal stiffness shearing

Rock joints infilled with sediments can strongly influence the strength of rock mass. As infilled joints often exist under unsaturated condition, this study investigated the influence of matric suction of infill on the overall joint shear strength. A novel technique that allows direct measurement of matric suction of infill using high capacity tensiometers (HCTs) during direct shear of infilled joints under constant normal stiffness (CNS) is described. The CNS apparatus was modified to accommodate the HCT and the procedure is explained in detail. Joint specimens were simulated by gypsum plaster using three-dimensional (3D) printed surface moulds, and filled with kaolin and sand mixture prepared at different water contents. Shear behaviours of both planar infilled joints and rough joints having joint roughness coefficients (JRCs) of 8–10 and 18–20 with the ratios of infill thickness to asperity height (t/a) equal to 0.5 were investigated. Matric suction shows predominantly unimodal behaviour during shearing of both planar and rough joints, which is closely associated with the variation of unloading rate and volumetric changes of the infill material. As expected, two-peak behaviour was observed for the rough joints and both peaks increased with the increase of infill matric suction. The results suggest that the contribution of matric suction of infill on the joint peak normalised shear stress is relatively independent of the joint roughness.     

Modeling and analysis of multiple access channel capacity based on hybrid energy storage and energy harvesting

Energy harvesting (EH) has been considered as a promising technology to solve the constrained energy problem in the devices of IoT with its advantages of flexible deployment and sustainable energy supply.For multiple access channel with energy harvesting,a hybrid energy storage structure model composed by super capacitor and battery was proposed for the devices of IoT.According to the peculiarities of medium access channel and energy harvesting system,an optimized energy allocation strategy with exponential-type decline (ETD) was presented,the upper and lower bounds of the average throughput were deduced,in particular,the gap of two bounds was derived to be a constant.The channel capacity was further obtained by utilizing the relationship between the average throughput and the channel capacity.In the simulations,the effect of harvested energy,storage capacity and the number of nodes on the channel capacity were analyzed respectively.Experiment results show that compared with the conventional wireless node with single battery storage,the proposed hybrid energy storage structure can improve the harvested energy value and increase the multiple access channel capacity by using adaptive modulation scheme when transmitting the signals.     

新型装配式冰场受力性能试验与模拟分析

为在2022年冬奥会期间将国家游泳中心泳池场地改造为冰壶场地,结合临时场地的新型制冰方式,提出了一种全装配式的冰壶场地及支承结构体系的构造作法.对此装配式冰场进行了现场试验测试和有限元受力性能分析,研究了装配式冰场的自振频率和振型特点,分析了冰场在使用荷载作用下的整体变形和各组件的应力水平,探讨了极端荷载作用下冰面受力、变形及开裂等关键问题.研究表明,所提装配式冰场方案具有较大刚度和承载力,能够满足冬奥会冰壶比赛对冰面的要求；此类冰场宜使用轻型浇冰车作业,大型浇冰车轮压引起的弯矩和剪力作用下冰面存在开裂的可能.     

Effect of functionally graded structure design on durability and thermal insulation capacity of plasma-sprayed thick thermal barrier coating

This paper aimed to design and optimize the structure of a thick thermal barrier coating by adding graded layers to achieve a balance between high thermal insulation capacity and durability. To this end, conventional TBC, conventional TTBC, and functionally graded TTBCs were deposited on the superalloy substrate by air plasma spraying. To determine the quality of the bond strength of the coatings, the bonding strength was measured. The durability of coatings was evaluated by isothermal oxidation and thermal shock tests. Then, at a temperature of 1000 °C, the thermal insulation capacity of the coatings was carried out. The microstructure of the coatings was characterized by a scanning electron microscope. The results showed that the thickness of the TGO layer formed on the bond coat in the conventional TBC and TTBC under the oxidation test at 1000 °C after 150 h was 2.79 and 2.11 μm, respectively, whereas, in the functionally graded TTBC samples, no continuous TGO layer was observed as a result of internal oxidation. The functionally graded TTBC presented higher durability than conventional TTBC due to improved bonding strength, thermal shock resistance, and the lack of a TGO layer at the bond/top coat interface. Also, the thermal insulation capacity of the functionally graded TTBC (with 1000 μm thickness of YSZ coating) was better than TTBC.     

The Marine Polysaccharide Ulvan Confers Potent Osteoinductive Capacity to PCL-Based Scaffolds for Bone Tissue Engineering Applications

Hybrid composites of synthetic and natural polymers represent materials of choice for bone tissue engineering. Ulvan, a biologically active marine sulfated polysaccharide, is attracting great interest in the development of novel biomedical scaffolds due to recent reports on its osteoinductive properties. Herein, a series of hybrid polycaprolactone scaffolds containing ulvan either alone or in blends with κ-carrageenan and chondroitin sulfate was prepared and characterized. The impact of the preparation methodology and the polysaccharide composition on their morphology, as well as on their mechanical, thermal, water uptake and porosity properties was determined, while their osteoinductive potential was investigated through the evaluation of cell adhesion, viability, and osteogenic differentiation of seeded human adipose-derived mesenchymal stem cells. The results verified the osteoinductive ability of ulvan, showing that its incorporation into the polycaprolactone matrix efficiently promoted cell attachment and viability, thus confirming its potential in the development of biomedical scaffolds for bone tissue regeneration applications.     

Investigations on hydrogen storage performances and mechanisms of as-cast TiFe0.8-mNi0.2Com (m=0, 0.03, 0.05 and 0.1) alloys

In order to improve the hydrogen storage performances of TiFe-based alloys, a new type of TiFe_0.8-mNi_0.2Co_m (m = 0, 0.03, 0.05 and 0.1) alloys were prepared through vacuum medium-frequency induction melting. XPS results showed that the composition of surface oxide film contains TiO₂, FeO and NiO for the cobalt-free alloy, and it also includes CoO and Co₃O₄ besides the above oxides for the cobalt-containing alloys. The activation temperature is 523, 403, 383 and 373 K for the TiFe_0.8-mNi_0.2Co_m (m = 0, 0.03, 0.05 and 0.1) alloys, respectively. The changes of the composition and microstructure of the surface oxide film are the root causes of the reduction of the activation temperature. XRD and SEM analyses showed that all the alloys are composed of the majority phase of TiFe phase and non-hydrogenated phase of Ti₂Fe phase. Adding appropriate amount of cobalt is beneficial to inhibiting the generation of Ti₂Fe phase and increasing the cell volume of TiFe phase. The hydrogenation capacity is proportional to the content of TiFe phase, which is 1.11, 1.48, 1.54 and 1.29 wt% for the TiFe_0.8-mNi_0.2Co_m (m = 0, 0.03, 0.05 and 0.1) alloys at 313 K, respectively. The hydrogenation plateau performance also is improved correspondingly.     

Nutritional and functional characterisation of hydrolysates from quinoa flour (Chenopodium quinoa) using two proteases

The objective was to study the nutritional and functional properties of hydrolysates from quinoa (Chenopodium quinoa) obtained by enzymatic hydrolysis of defatted quinoa flour (DQF). The commercial enzymes alcalase and flavourzyme were used to obtain the hydrolysates defatted quinoa flour hydrolysate with alcalase (DQFA) and defatted quinoa flour hydrolysate with flavourzyme (DQFF), respectively, after 3 h of digestion at 50°C and pH 8. The degree of hydrolysis (47.32%), yield (31.05%) and protein recovery (88.80%) values were higher in DQFA; however, its protein content (48.34%) was lower compared to that of DQFF (55.06%). Also, DQFA had a solubility greater than 57% over a wide pH range (2–10) and good foam stability (70–90%). On the other hand, DQFF presented adequate emulsifying activity (61.30 m²/g), emulsifying stability (158.62 min) and foaming capacity (131%). Due to the high content of macro- and micronutrients and adequate emulsifying and foaming properties, DQFA and DQFF could be used as ingredients in various processed food products and protein supplements.     

钢筋UHPC梁正截面抗弯承载力计算方法

超高性能混凝土(ultra-high-performance concrete，UHPC)是一种高强、高韧性和高耐久性的新型水泥基复合材料，具有广阔的应用前景。由于UHPC内的钢纤维能有效控制裂缝开展并提高UHPC的抗拉强度，因此，UHPC构件抗弯承载力分析时，一般计入截面受拉区UHPC的抗拉作用，但对于如何考虑受拉区UHPC的抗弯贡献，国内外相关研究结果间存在较大分歧，因此值得进一步研究。首先，编制钢筋UHPC梁正截面抗弯承载力分析程序，分析不同设计参数对截面受拉区UHPC抗弯贡献的影响。结果表明：配筋率、梁高、钢纤维长度、截面形状和预应力水平是影响受拉区UHPC抗弯贡献的主要参数。基于参数分析结果的回归分析，提出截面受拉区UHPC的均匀分布应力折减系数k的计算公式；通过引入受拉翼缘面积折减系数kf，考虑不同截面形状的影响。在此基础上，提出不同弯曲破坏模式下钢筋UHPC梁抗弯承载力的简化计算方法，并以国内外115根钢筋UHPC梁抗弯承载力试验结果验证所提方法的适用性。